drupal hit counter
Jerry Huang | June 2013

Jerry Huang apps and developing apps

IP CAM Controller 3.0 and above: how to share camera link to family member

22. June 2013 21:29 by Jerry in IP CAM, Windows Phone

In the latest 3.0 release, a "share camera" via deep link function has been introduced (Android version has the same feature). The main purpose of this function is to send an encrypted hyper link (aka deep link in WP's world) to a close friend (such as your wife/husband or your parent) who has very little knowledge about setting up camera on the phone. The recipient requires to have a Windows Phone 8 and installed my app beforehand.


Step 1: 

In the single viewer screen, tap the 4th button at the right-down corner:

 A pop up menu will shows up

Choose "share camera" from the menu

Step 2:

Choose the way you would like to send the link:


In this case, let's choose Email. After tapping the "Send by Email", it will prompt the phone's email app, if you have configured more than one email accounts, you will need to choose which account you would like the message sending from.

Step 3:

Send out the message.





 The email message at receiver's mailbox will look like this:

Just simply tap on the link, the phone will activate my app to view the camera directly (again, IP CAM Controller must be installed first)


Is that it? Not just yet! By tapping the 4th button again, and choose "save camera" from the menu, your recipient is able to save the camera so that he/she doesn't need to tap the link every time in order to view your camera.

IP CAM COntroller 3.0 and above: edit camera and grouping

22. June 2013 12:46 by Jerry in IP CAM, Windows Phone

Add your first camera

a) Tap the "settings" button in main screen

b) Input camera info and save it


1) Choose a camera type most close to your IP Camera; sometimes you need to try all types of your brand, e.g. Foscam user is suggested to test each Foscam type in the app in order to find out which one work the best for you.

2) Type in a camera name you like.

3) If your camera is a DVR, you may need to input a camera no which is normally corresponding to stream no, channel no etc.

4) Hostname or IP address of your camera. In order to access your camera over the internet (e.g. a 3G network), you must use internet IP address, but not internal address like 192.168.1.x. This kind of address only work at home when you are connected to home WiFi.

5) The port no where your camera is hosted on. If your camera is behind a WiFi router, you will probably need to configure port forwarding on your router.

6) Type in username and password of your camera (not the router) and choose the quality and image resolution.

7) Tap the "save" button at the bottom of this screen.


Add the 2nd camera

a) Tap the "settings" button again

b) Tap the "new" button and do the same as you set up the first camera, and don't forget to tap the "save" button to save it


Edit a camera

a) Press and hold on the camera you want to edit, then choose "edit" (this is new menu item from v2.5.3, older version please go to step c) from the pop up menu.



b) Update the camera info, then tap the "save" button 


c) Alternatively, you can tap the "Setup" icon in main screen and then choose the camera from "My Cameras" list; then go ahead, but don't forget to tap the "save" button at the end. 


Delete a camera

Press and hold a camera in the main screen, then choose "delete" from pop up menu.

Add a multi-view grouping

 a) Tap the "settings" button in main screen (Multi View section)

b) Tap the ellipsis (...) from bottom, then choose your cameras from the list

c) Tap the "save" icon (only for paid version, free trial could not save the view) 

d) Input a name for the grouping

e) The view will then be saved for further usage











WP8: IP CAM Controller 3.0 FAQ

21. June 2013 21:40 by Jerry in IP CAM, Windows Phone

Audio was the top demanded feature for most users, after more than 1 year's investigation and months coding, I finally find a way to work this around. I'm very pleased to announce that IP CAM Controller 3.0 for WP8 with audio for selected cameras is finally launch!! For a completed and latest list that which camera supported audio, please click here


I received a few early feedback (mostly about audio and payment), some suggestions are awesome and I will make them happen in the near future (I promise:). Since the WP market doesn't allow me to reply (unlike Google) to review and comment, so I decided post my reply here and hopefully some of the users could read it.


Q1: I already paid for the app in your previous version, how come it's showing demo in the new version?

The app on your phone is still paid status, it still has all the paid features (ad is gone and no limitation on grouping) you used to have. From 3.0 version, I introduced the so-called camera specific Advanced Features in app products which is a series premium functions require a little extra money. It's like unlocking an episode in a game. Please kindly understand that this is the way to support my development and so keep this app continue.

Q2: How does the demo mode work? What the difference between paid and un-paid?

Audio is the most featured premium function for now (2 way audio might be the next one), you can enjoy 90 seconds of free trial every time you enter the single view, when time is up, audio will be disconnected (although you can go back and tap the camera again to have another 90 seconds). After you purchase the specific camera, you are entitled to unlimited audio (and so other advanced functions).

Q3: How do I purchase

In the single viewer screen, tap the 4th button (with name "featured") at right-down corner,

After successful payment, the icon will change to:


After that, a series of featured functions (depending what camera you have, I have different support for different camera) will then be showing up.


Then select the first menu item from the bottom (in the current version the wording is Unlock xxxx). It will display your camera product name here. If your camera is Foscam, it will say Buy Foscam (please note current market version will say Unlock Foscam). After tap this menu, it will lead you to the Windows Store purchase system for payment.

Q4: I have several Foscam cameras, do I need to pay each of them in order to use audio?

No. You just need to pay once, even with different foscam types. The idea is to categorize products by camera brands (not specific model/submodel), once foscam type is purchased you are entitled to all foscam cameras' advanced feature, same to other brands.

Q5: If I have a Foscam and a Panasonic, do I need to pay twice if I want audio for both of them?

Unfortunately yes. This is because I have been putting efforts for different types of camera, most of cameras work completely different in terms of audio. As a result, I have to customize the implementation for different brands and therefore comes the charge.

Q6: If in the future you release 2 way audio support, do I need to pay again?

For 2 way audio support, it will be binding into existing advanced features, in other word, no extra payment is required if this feature is added. Actually I will be focusing on those camera with audio supported, to add more Advanced Features (like switching light or infrared, etc), and those features will be binding to existing paid products as well.

Q7: Do I need to buy the app first before purchasing Advanced Features of my camera?

No. Buying the app will enable you to unlock the limitation of multiview grouping and the number of camera you can save, as well as removing ad. If you are fine with these restriction, you don't need to buy the app itself.